How to Prevent Red Marks and Skin Irritation
Babies have delicate, sensitive skin. Proper fit, correct sensor placement, and regular skin checks can help reduce the risk of redness, pressure marks, and irritation.
1. How to Prevent Red Marks
1.1 Choose the Right Size
- Select the correct sock size according to the Sense-U sizing guide.
- Make sure the sock fits snugly without being too tight or loose.
- Keep the fabric smooth, without folds or wrinkles.
- Recheck the fit as your baby grows.
1.2 Position the Sensor Correctly
- Follow the official wearing instructions to position the sensor.
- Make sure the sensor sits securely without excessive pressure.
- Never place the sensor over irritated or damaged skin.
1.3 Alternate Feet & Check Skin Regularly
- Alternate between the left and right feet daily according to the wearing instructions.
- Check your baby's skin regularly, especially during the first few days of use.
- Inspect the skin whenever the sock is removed or changed.
- Pay attention to redness or pressure marks beneath the sensor and around the sock edges.
1.4 Keep Feet and Socks Clean & Dry
- Make sure your baby's feet are clean and dry before use.
- Avoid lotions, creams, oils, or powders beneath the sock.
- Clean the sock and sensor according to the product instructions.
- Avoid tight clothing or extra layers that may increase pressure or trap moisture.
1.5 Check the Sock and Sensor
Before use, inspect the sock and sensor for damage, deformation, moisture, or rough edges.
Stop using the device if it feels unusually warm, appears damaged, or operates abnormally. Do not charge or reuse a device suspected of overheating. Contact Sense-U Customer Support.
2. What Causes Red Marks?
Red marks or irritation may be associated with:
- Pressure: A sock that is too tight or worn on the same area for too long.
- Friction: A loose sock or incorrectly positioned sensor rubbing against the skin.
- Moisture: Sweat or damp fabric trapped against the foot.
- Incorrect Fit: An unsuitable sock size or sensor placement.
- Sensitive Skin: Existing irritation or sensitivity to fabrics or cleaning products.
- Device Abnormalities: Unexpected heating, damage, or abnormal operation.
A red mark may have more than one possible cause. Its appearance alone cannot confirm the cause.
3. What to Do If Red Marks Appear
- Step 1 — Remove the Sock
Remove the device immediately if you notice redness, irritation, blisters, or damaged skin.
Do not place the device back on the affected area.
- Step 2 — Check the Fit and Device
Check the sock size, sensor placement, moisture, and possible pressure points.
Also check for unusual device warmth, damage, or abnormal operation.
- Step 3 — Allow the Skin to Recover
Avoid further pressure or friction until the skin has fully recovered.
If device overheating or malfunction is suspected, do not reuse the device until the issue has been reviewed with Sense-U Customer Support.
- Step 4 — Seek Medical Advice if Needed
Contact a healthcare professional if redness persists or worsens, or if blisters, broken skin, swelling, or signs of infection develop.
Seek prompt medical attention for suspected burns or significant skin injury.
- Step 5 — Contact Sense-U Support
If redness or irritation occurs during use, please contact Sense-U Customer Support.
Photos of the affected area, sock size, wearing duration, and device information may help us review the issue.
4. Quick Skin Safety Checklist
| Before & During Use | What to Check |
| ✓ Correct Size | Snug, not too tight or loose |
| ✓ Correct Placement | Sensor positioned as instructed |
| ✓ Alternate Feet | Switch feet according to instructions |
| ✓ Regular Skin Checks | Inspect skin whenever changing or removing the sock |
| ✓ Clean & Dry | No moisture, lotions, or excessive pressure |
| ✓ Device Condition | No damage, unusual warmth, or abnormal operation |
Important: If redness, irritation, blisters, or skin damage develops, remove the device. Do not continue using it on affected skin. Seek medical advice when appropriate.